RCF CX15N351 15" Coaxial Transducer w/ Extended Response Copper Inductance Ring
This CX15N351 is designed to provide an excellent frequency response linearity with very low distortion. This coaxial use a strongest unique neodymium magnetic structure that guarantee high dynamic and sensitivity for both components. The mid-bass section use a 3,5ö voice coil design provides a very high power handling, especially recommended in comparison to a standard 3" voice coil, demodulation ring get a fastest time response and lower distortion . The compression driver use a 2.5-inch diaphragm with a 1.4 inch throat featuring several state of the art technologies. The diaphragm and suspension are formed from 0.05mm thick pure titanium. The unique magnetic structure allow to get a single point source that providing coherent wave front.
This CX15N351 is designed to provide an excellent frequency response linearity with very low distortion. This coaxial use a strongest unique neodymium magnetic structure that guarantee high dynamic and sensitivity for both components. The mid-bass section use a 3,5ö voice coil design provides a very high power handling, especially recommended in comparison to a standard 3" voice coil, demodulation ring get a fastest time response and lower distortion . The compression driver use a 2.5-inch diaphragm with a 1.4 inch throat featuring several state of the art technologies. The diaphragm and suspension are formed from 0.05mm thick pure titanium. The unique magnetic structure allow to get a single point source that providing coherent wave front.
- RCF CX15N351 15" Coaxial Transducer w/ Extended Response Copper Inductance Ring
- SKU: RCF13-CX15N351 Features:
- 3.5 - inch Inside / Outside copper voice coli
- 900 Watt continuous program power LF
- 101 dB Sensitivity
- 40 Hz - 3 kHz Frequency range
- Dual - forced air ventilation for minimum power compression
- Dual spider design with silicon based damping control
- 2.5 - inc Diaphragm, 1.4 - inch Exit Throat / Pure Titanium Compression Driver
- 180 Wat Continuos program power HF
- Frequency range: 700 Hz - 20 kHz
- Direct Drive Voice Coil Assembly
- 3 - slot, optimized geometry phase plug
- Aluminum rear cover dissipation design
- Copper inductance ring for extended response
- Vented, damped, low distortion, variable profile suspension System
- CX15N351 Driver
- Nominal Diameter: 35.5 / 1.4 mm/inch
- Rated Impedance: 8 O
- Program Power: 180 W
- Power Handling Capacity: 90 W
- Sensitivity 1 W, 1 m: 110 dB
- Frequency Range: 700 - 20000 Hz
- Minimun Impedance: 7.9 O
- Voice Coil Diameter: 63.7 / 2.5 mm/inch
- Voice Coil Material: Edgewound A1
- Number of layers: 1 - Outside
- Diaphragm Material: Pure Titanium
- Diaphragm Design: Dome
- Suspension Material: Pure Titanium
- Suspension design: Progressive
- BL factor: 10.4 T ? m
- Flux density: 2.0 T
- Phase plug design: 3 slot
- Phase plug material: Aluminium
- Magentics: Neodymium
- Voice Coil Demodulatuon: Copper ring
- CX15N351 Horn
- Throat Diameter: 36 / 1.4
- Nominal coverage (-6dB): 60??
- Cut-off Frequency: 800
- Material: Structural Polyurethane
- CX15N351 Woofer
- Nominal Diameter: 380 / 15 mm/inch
- Rated Impedance: 8 O
- Program Power: 900 W
- Power Handling Capacity: 450 W
- Sensitivity: 101 dB
- Frequency Range: 40 - 3000 Hz
- Effective Piston Diameter: 330 / 13 mm/inch
- Max Excursion Before Damage (peak to peak): 39 / 1.5 mm/inch
- Minimun Impedance: 6.8 O
- Voice Coil Diameter: 87 / 3.4 mm/inch
- Voice Coil Material: Copper
- Voice Coil Winding Depth: 16.5 / 0.65 mm/inch
- Number of layers: 2
- Kind of layer: inside / outside
- Top Plate Thickness: 11 / 0.43 mm/inch
- Cone Material: No pressed pulp
- Cone Design: Curved
- Surround Material: Polycotton
- Surround Design: M - roll
- Thiele/Small Parameters
- Resonance frequency: Fs - 55 Hz
- DC resistance: Re - 5.6 O
- Mechanical Factor: Qms - 6
- Electircal Factor: Qes - 0.27
- Total Factor: Qts - 0.26
- BL Factor: Bl - 23.5 T ? m
- Effective Moving Mass: Mms - 80 g
- Equivalent Cas air load: Vas - 110 liters
- Effective piston area: Sd - 0.086 m?
- Max. linear excursion ( mathematical): Xmax - 5.5 mm
- Voice - coil inductance @ 1 kHz: Le1K - 1.65 mH
- Half-space efficiency: Eff - 6.53%
- Mounting Information
- Overall Diameter: 393 / 15.5 mm/inch
- Bolt Circle Diameter: 371 - 376 / 14.6 - 14.8 mm/inch
- Bolt Hole Diameter: 6.5 / 0.3 mm/inch
- Front Mount Baffle Cut-out: 354 / 13.9 mm/inch
- Rear Mount Baffle Cut-out: 354 / 13.9 mm/inch
- Depth: 164 / 6.4 mm/inch
- Volume occupied by the driver: 3.8 / 0.13 liters/ft?
- Shipping Information
- Net Weight: 6.51 / 14.3 kg/lbs
- Shipping Weight: 7.3 / 16 kg/lbs
- CX15N351 spec sheet
- This item is New
- 3 Year Manufacturer's Warranty
Return Policy
This item can be returned in its original packaging and condition within 14-days of receipt for a refund, minus a 20% restocking fee, and minus shipping.
Warranty Information
- This item has a 90-day Smart DJ warranty.
- This item has a 1-Year manufacturer's warranty.