Audio Technica ATW-1812D 1800 Series Wireless D Band W/ Atw-R1810 & Atw-T1802
All 1800 systems are designed for all kind of applications where a portable receiver is needed, like Electronic News Gathering (E.N.G.) or others. Extremely compact receiver easy to mount on a camera with included Hook & Loop-type fastener, UHF reception with up to 996 frequencies selectable in 25 kHz steps, Automatic frequency scanning for easy selection of open channels, Tone Lock squelch system eliminates interference when transmitter is off Headphone monitor output with independent level control, Battery level indicator., Soft-touch controls for easy frequency selection, True Diversity operation for freedom from dropouts, LCD frequency and battery status display with backlight, Antenna and AF Peak LED indicators, Easy, user-friendly operation, Clear, natural sound and quality.
All 1800 systems are designed for all kind of applications where a portable receiver is needed, like Electronic News Gathering (E.N.G.) or others. Extremely compact receiver easy to mount on a camera with included Hook & Loop-type fastener, UHF reception with up to 996 frequencies selectable in 25 kHz steps, Automatic frequency scanning for easy selection of open channels, Tone Lock squelch system eliminates interference when transmitter is off Headphone monitor output with independent level control, Battery level indicator., Soft-touch controls for easy frequency selection, True Diversity operation for freedom from dropouts, LCD frequency and battery status display with backlight, Antenna and AF Peak LED indicators, Easy, user-friendly operation, Clear, natural sound and quality.
- Audio Technica ATW-1812D 1800 Series Wireless D Band W/ Atw-R1810 & Atw-T1802
- SKU: ADT12-ATW-1812D
- Type of System: UHF Camera Mount, Frequency Agile
- RF Carrier Frequency Range: UHF Band: 655.500 to 680.375MHz
- Approx. Working Range: 100m (300') typical
- Overall Frequency Response: 70Hz to 15kHz
- Signal-to-Noise Ratio: 104dB at 30kHz deviation (A-weighted), maximum modulation 37kHz
- # Of Channels: 996 total per band (25kHz increments)
- # Of Simultaneous Systems: Not Specified by Manufacturer
Receiver - Type of Receiver: Dual independent RF sections, automatic-switching diversity
- Type of Outputs: 3-pin mini XLR (TA3M-type)
- Headphone Monitoring: 3.5 mm TRS, signals on both Tip and Ring
- Power Requirements: 12V DC nominal, 500 mA
- Battery Type/Approx. Life: ATW-R1810: Four 1.5V AA alkaline (not included) - 10 hours typical depending on battery type and use pattern
- Display: Frequency selection is achieved via rotary dials located on the side of the unit
- Antenna Type: 1/4 wave vertical (fixed)
- Dimensions (HxWxD): 4.92 x 2.95 x 1.25" (125 x 75 x 32mm)
- Weight: 10.5 oz (300 g) (without battery)
Transmitter - Type of Transmitter: ATW-T1802 Plug-In Transmitter
- Type of Input Connector: XLR
- Type of Microphone: Plug-In Transmitter Accepts both, dynamic and condenser microphones with 3-pin XLR connections
- Polar Pattern: Not Applicable
- Interchangeable Mic Heads: Accepts all microphones and line-level sources wired with TA5F connection.
- Battery Type/Approx. Life: Two 1.5V AA alkaline (not included)
- Mute Switch: Not Specified By Manufacturer
- Level Control: Not Specified By Manufacturer
- Antenna Type: Internal
- Display: Back-lit LCD
- Dimensions (WxHxD): 1.57 x 4.37 x 1.57" (40 x 111 x 40mm)
- Weight: 199 grams (7.0 oz) (without batteries)
- This item is New
- 1-Year Manufacturer's Warranty
Features:
SystemProduct Manuals:
1800 Series Wireless Systems Manual (single-channel)
Return Policy
This item can be returned in its original packaging and condition within 14-days of receipt for a refund, minus a 20% restocking fee, and minus shipping.
Warranty Information
- This item has a 90-day Smart DJ warranty.
- This item has a 1-Year manufacturer's warranty.