RCF CX10N251 10" Coaxial Transducer with Aluminum Rear Cover Dissipation Design
The CX10N251 is a lightweight coaxial driver with excellent linearity and high efficiency. It radiates a coherent single spherical wave front with perfect dispersion control. The design is powered from a large sized single neodymium ring magnet that provides an extremely high flux density and BL factor. The new hyper-vented aluminium basket and magnetic assembly design provide an excellent heat dissipation and lower power compression. Special air-forced ventilations are provided for voice coil, magnet assembly and basket. A 2,5ö voice coil combined a strength fibreglass former and aluminium wire drives the mid-bass cone with high efficiency and a good extension. The 1,7ö dome compression driver, loaded to a 60? conical waveguide, provides a clear vocal output and a perfect high frequency extension.
The CX10N251 is a lightweight coaxial driver with excellent linearity and high efficiency. It radiates a coherent single spherical wave front with perfect dispersion control. The design is powered from a large sized single neodymium ring magnet that provides an extremely high flux density and BL factor. The new hyper-vented aluminium basket and magnetic assembly design provide an excellent heat dissipation and lower power compression. Special air-forced ventilations are provided for voice coil, magnet assembly and basket. A 2,5ö voice coil combined a strength fibreglass former and aluminium wire drives the mid-bass cone with high efficiency and a good extension. The 1,7ö dome compression driver, loaded to a 60? conical waveguide, provides a clear vocal output and a perfect high frequency extension.
- RCF CX10N251 10" Coaxial Transducer with Aluminum Rear Cover Dissipation Design
- SKU: RCF13-CX10N251 Features:
- 600 Watt continuous program power handling Mid-Bass
- 2.5-inch , fibreglass outside, aluminum voice coil
- 99 dB Sensitivity
- 65 Hz - 3.5 kHz Frequency range
- Dual-forced air ventilation for minimum power compression
- M -roll surround and exponential cone geometry
- Demodulation ring
- 100 Watt Continuous program power handling HF
- 1.75-inch Diaphragm, 1.0-inch Exit Throat
- Frequency range: 1200Hz û 20kHz
- 2-slot, optimised geometry phase plug
- Polyester diaphragm
- Aluminum rear cover dissipation design
- CX10N251 Driver
- Nominal Diameter: 25.4 / 1.0 mm/inch
- Rated Impedance: 8 O
- Program Power: 100 W
- Power Handling Capacity: 50 W
- Sensitivity 1 W, 1 m: 109 dB
- Frequency Range: 1200 - 20000 Hz
- Minimun Impedance: 6.5 O
- Voice Coil Diameter: 44.4/1.75 mm/inch
- Voice Coil Material: Edgewound Aluminum
- Number of layers: 1 - Outside
- Diaphragm Material: Polyimide
- Diaphragm Design: Dome
- Suspension Material: Polyimide
- Suspension design: Flat
- BL factor: 7.5 T ? m
- Flux density: 1.9 T
- Phase plug design: 2 slot
- Phase plug material: Composite
- Magentics: Neodymium
- CX10N251 Horn
- Throat Diameter: 25.4 / 1.0
- Nominal coverage (-6dB): 60??
- Cut-off Frequency: 1800
- Material: Structural Polyurethane
- CX10N251 Woofer
- Nominal Diameter: 250 / 10 mm/inch
- Rated Impedance: 8 O
- Program Power: 600 W
- Power Handling Capacity: 300 W
- Sensitivity: 99 dB
- Frequency Range: 65 - 3500 Hz
- Effective Piston Diameter: 210 / 8.27 mm/inch
- Max Excursion Before Damage (peak to peak): 30 / 1.18 mm/inch
- Minimun Impedance: 6.4 O
- Voice Coil Diameter: 64 / 2.51 mm/inch
- Voice Coil Material: Aluminum
- Voice Coil Winding Depth: 14 / 0.55 mm/inch
- Number of layers: 1
- Top Plate Thickness: 8 / 0.31 mm/inch
- Cone Material: No pressed pulp
- Cone Design: Curved
- Surround Material: Polycotton
- Surround Design: M - roll
- Thiele/Small Parameters
- Resonance frequency: Fs - 72 Hz
- DC resistance: Re - 5.2 O
- Mechanical Factor: Qms - 4.5
- Electircal Factor: Qes - 0.25
- Total Factor: Qts - 0.23
- BL Factor: Bl - 17.5 T ? m
- Effective Moving Mass: Mms - 28 g
- Equivalent Cas air load: Vas - 25 liters
- Effective piston area: Sd - 0.035 m?
- Max. linear excursion ( mathematical): Xmax - 4.8 mm
- Voice - coil inductance @ 1 kHz: Le1K - 1.2 mH
- Half-space efficiency: Eff - 4.7%
- Mounting Information
- Overall Diameter: 260 / 10.24 mm/inch
- Bolt Circle Diameter: 241 - 246 / 9.50 - 9.60 mm/inch
- Bolt Hole Diameter: 5.5 / 0.22 mm/inch
- Front Mount Baffle Cut-out: 234 / 9.21 mm/inch
- Rear Mount Baffle Cut-out: 234 / 9.21 mm/inch
- Depth: 126 / 4.96 mm/inch
- Volume occupied by the driver: 2.1 / 0.07 liters/ft?
- Shipping Information
- Net Weight: 3.1 / 6.83 kg/lbs
- Shipping Weight: 3.3 / 7.28 kg/lbs
- en_CX10N251 spec sheet
- This item is New
- 3 Year Manufacturer's Warranty
Return Policy
This item can be returned in its original packaging and condition within 14-days of receipt for a refund, minus a 20% restocking fee, and minus shipping.
Warranty Information
- This item has a 90-day Smart DJ warranty.
- This item has a 1-Year manufacturer's warranty.